Second Generation Nissan Xterra Forums banner

Installing the Atoto s8 ms on my 2011 S, 4x4, GCC Specs (Dubai)

457 views 2 replies 2 participants last post by  dafonseca  
#1 · (Edited)
Hello!

My Xterra has GCC specs, and I think that is creating an issue on my new head unit installation...

It has the integrated radio that does not say "rockford fosgate" https://photos.app.goo.gl/GSoYDtUUyDPJECCg6 , but is is similar to the RF unit (and dissimilar from the other integrated in dash radio version).

I also have 4om speakers, but no subwoofer.

this is the back of the unit, and the connectors that attach to it.
Image


My new head unit is the Atoto S8 MS.

My question is what harness to buy to connect both.
It seems to me that I need the Metra 70-7552 http://www.metraonline.com/part/70-7552to connect to the connector on the right (with red circle) and the PAC Roem NIS Radio Replacement Interface - PAC to connect to the 2 connectors in the center(green circle).

Do I need both of these? do I need something else? the atoto website or the crutchfield website give me solutions that seem only geared to the version of the xterra sold in the US, but because this is a GCC(arab countries) version of the xterra, I seem to have a combination of equipment's that is not considered by these companies.

All help is welcome
 
#3 ·
Crutch field was not a big help... I have a GCC version of the Xterra that has a radio version that is not in the crutchfield website.

I found that I need the metra 70-7550, that is similar to the 70-7551 but for the non RF Head unit.

I am now trying to solve the Steering Wheel Controls, and which wires to tap... Amy help?