Second Generation Nissan Xterra Forums banner

1 - 6 of 6 Posts

·
on line
Joined
·
3,262 Posts
Discussion Starter #1
Im just wondering because I ran mine along side of the rear sway bar and up to the frame than out to the rear passanger side light.... BUT i am in the process of putting my rear suspension lift on and i am going to leave the sway bar off. so i would like to see some pics of peoples trucks that did the extension and dont have the sway bar on. :shaking:
 

·
on line
Joined
·
1,479 Posts
I still have my bar but I instaled the breather on a different route maybe this helps



 

·
on line
Joined
·
3,262 Posts
Discussion Starter #3
Yeah that helps a little but since i am installing the lift too its hard to judge how much slack to give the tube. And it seems hard to find a place to run the hose without it rubbing up against either the muffler or the tire. maybe i should wrap it in some sort of heat resistant tape or something.
 

·
on line
Joined
·
2,938 Posts
Just leave about 4 extra inches in the line if you are installing a lift.
 

·
on line
Joined
·
1,479 Posts
I would run it along the bake line at leat you know is not rubing and you have enough for axel travel
 

·
on line
Joined
·
122 Posts
I finally got around to this mod today. I ran it up and ran it along the frame rail away from the exhaust. I used zip ties to loosely hold it in place. I bet I have about a foot of slack if you straightened it out. BTW...I bought 6 feet of tubing to insure I had enough length.
 
1 - 6 of 6 Posts
Top