Second Generation Nissan Xterra Forums banner

Transfer Case Gears

13699 Views 35 Replies 9 Participants Last post by  Offroad
1 - 10 of 36 Posts
Low gearing is not just for power, but for crawling at very low speeds and controling the vehicle with just the throttle.
Hi: 1:1
Low: 2.625:1

MT OR crawl ratio: 42.332
dan galusha said:
My thinking is that it should work with ours since we share the same exact t-case. That would help us out even more then the first gen so who's going to be the first one to try?
Totally different T/C according to Brent:

http://www.4x4parts.com/ubbthreads/...=475982&page=0&view=collapsed&sb=5&o=&fpart=1
Grunzen said:
Well there should be plenty of Gen1 and Gen2 together this weekend so we all can look at them in Richmond. I don't think Brent is right on that one but then again I might be wrong to. :geek:
Hope you're right and Brent is wrong, but I guess both T/C options would have claimed they fit 2nd. gen as well.
Grunzen said:
I'll do that. Also Dan and Dyna know but for everyone else TC gears for sure are coming for us.
Can't wait :cyclops:
Grunzen said:
No, a certain vendor vehicle is testing them. they were all over MOAB. So hopefully less than 4 1/2 years. :toothy7: dink
Can you please give us more info about it? :cheers:
kokopop said:
hmmm. Nissan. Very interesting.
If it's nissan, hope we can get them and it's not just an option only offered on 07+ Xs.
If the wheels sell for $300+ each, wonder how much would they want for the gears :geek:
Grunzen said:
No, a certain vendor vehicle is testing them. they were all over MOAB. So hopefully less than 4 1/2 years. :toothy7: dink
Any update on this?
1 - 10 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top