[BuffaloXterra08]

Anyone have trouble aiming their SpecD Low-Beam projectors? Mine are aimed super high and I can't seem to find a screw to aim them or moving the projector manually by itself. The only screws I can even see are right/left on the Low-Beam side, and right/left/diagonal on the high-beams.

I'm aware they're cheap "ricey" product, but they seem to work just fine aside from the high aim.

 

[Grek323]

Anyone have trouble aiming their SpecD Low-Beam projectors? Mine are aimed super high and I can't seem to find a screw to aim them or moving the projector manually by itself. The only screws I can even see are right/left on the Low-Beam side, and right/left/diagonal on the high-beams.

I'm aware they're cheap "ricey" product, but they seem to work just fine aside from the high aim.

It took me several tries to find the adjustment screw. I had to stick my hand near the bottom of the housing and found the screw in the lower corner of the lamps. To give you an idea of where mine were, I had to push my battery back a couple inches and felt the the adjustment screw in the bottom right corner of the housing and was able to adjust with a stubby Phillips screwdriver

 

[BuffaloXterra08]

Yeah eventually I figured out that the projectors appear to be on a square plane and the screws point of contact are the two lower corners, so to aim up/down both screws need to be rotated at the same time, the same amount. Such a weird system but I had to do the same thing, moved the batter over and used my 90 degree driver.