Second Generation Nissan Xterra Forums banner

Proposed Suspension Lift

17187 Views 32 Replies 14 Participants Last post by  kokopop
Hey guys. I'm trying to put together a shopping list of items that I'll need to lift my truck a bit. I'm not going to be doing any serious offroading at this time, as this is my daily driver. However, I'd like to lift it enough to give it a more aggressive look and stance.

So, after reading through some of the posts here, and listening to several opinions, I've put together the following list. Please let me know your thoughts on the following items.

Xterra Front Lift Coils

Daystar 2" SL (Do I still need to install the spacers if I install the AC coils?)

Timbren Front and Rear Kits

Will the front and rear be balanced out with this combination of parts?
Will I be able to fit a 295/75R16 or 305/70R16 with this lift? (obviously on aftermarket rims) I'd go with BFG AT's.
Can I still use the stock Bilsteins that came on the truck, or will I need to change those out?

And, of course, I'm looking to get the Shrockworks front bumper and sliders at some point, as well. So, the truck will really look BA. :)
1 - 1 of 33 Posts

Look at this thread I started - I talked about how I did it with loaning out 2 sets of spring compressors.
1 - 1 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.