Second Generation Nissan Xterra Forums banner
1 - 3 of 3 Posts

·
on line
Joined
·
315 Posts
Discussion Starter · #1 ·
I know some people have removed the front fairing and had problems with the bolts not going back into place. I want to know, has anyone taken the ENTIRE rack off, and had the same problem with any other bolts? Or is this only a problem with the bolts on the fairing?

Also, has anyone removed the bolts for the fairing and NOT had a problem putting them back in place?

Finally, can the rack itself (feet and bars) be removed without removing the front fairing? I'm guessing no, but I haven't looked at the rack in detail in a long time.

I'm going to remove the roof rack to run wiring for lights, and want to know what to expect....thanks!
 

·
on line
Joined
·
315 Posts
Discussion Starter · #5 ·
Whoops I just saw that there's one stored with the jack. The bolts holding the actual rack down are incredibly tight. I think I'm going to skip trying to take the rack off, and just wire another way. I'm considering the MC-style hole through the roof, but just can't bring myself to drill through the roof! Perhaps I'll have to put up with a wire going from the top of the door to the roof.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top