Second Generation Nissan Xterra Forums banner

OBDII Scanner - SRS / Airbag

552 Views 11 Replies 5 Participants Last post by  Blvck Myst
ANyone have a recommendation for a scantool that can read and reset airbag codes/lights?
Would be nice to see other data as well, but not critical. (trans temps, O2, etc.)

I'm not really into bluetooth units, or big tablet looking units that are boggy. My budget is around $100, prefer less obviously, but will go $125 if that's what it costs.

I browsed amazon, and I just cant tell what a good brand is. There's so many.

What's simple, reliable, has a cable, and isn't big? Looking to diagnose airbag system after I make some repairs.
Thanks
1 - 5 of 12 Posts
$100-125 isn't going to get you what you want.
Thanks
What’s the next price point to be able to read srs codes? Plus the general obdii duties

This one "seems" good. Has a $30 off instant coupon too when i check the box.
Just am not familiar with any brands. I've only ever used my harbor freight $11 basic one for CEL's and I/M
Has a $20 code, so it is closer to $100. I got that one to reset the SAS because everytime I disconnect the battery, the VDC and Slip LEDs come on. I found out after disconnecting the battery to replace my clockspring, which was the original problem. I solved both issues with the scanner.
It is kind of slow, but it gets the job done.
Nice, thanks for the recommendation
Dang, there’s some good sales right now on these.
Thanks for the input.
Autel, launch, foxwell all seem like good options
  • Like
Reactions: 1
1 - 5 of 12 Posts
Top