Second Generation Nissan Xterra Forums banner

1 - 20 of 496 Posts

·
Registered
Joined
·
1,105 Posts
Discussion Starter #1 (Edited)
Username: MotorPsycho

Year: 2012
Make: Nissan
Model: Xterra
Trim: PRO-4X
Color: Metallic Blue



More on the new build starting on page 6.

Mod List...

Suspension, Wheels, Tires:
PRG Titan UCA's
Stock Titan LCA's
Sway-A-Way 2.5" Ext. Resi Coilovers w/Eibach Springs
Alcan Leaf Packs 4.5" of lift, 425lbs capacity
10" Travel Radflo 2.0 Remote Resi Rear Shocks
Rear Shocks Relocated
PRG U-Bolt Flip Kit
3 Degree Shims
PRG Heim Outer Steering
PRG SS Brakelines
PRG Cam Bolts
Stock PRO-4X Wheels Powder Coated Black
285/75R16 Goodyear Wrangler Duratracs
EZAccessory 2" wheel spacers
Timbren Bump Stops Front/Rear
DIY Rear Brakeline Bracket


Powertrain/Drivetrain:
M205 Front Diff
Titan CV's
Locker Anytime Mod
Volant CAI w/AMSOIL Filter/Pre Filter
DougThorley LT Headers
Magnaflow #12258 Muffler
XTP IMS
Radiator Bypass
AMSOIL Fluids All Around


Armor/Protection:
Shrockworks Front Bumper
NXRocks/HeftyFab full skid plates
Maximum Design (maXTERRA) Rear Bumper w/Tire Carrier
Maximum Design (maXTERRA) Rock Sliders
BTF M226 Diff Cover
All Skids & Diff cover are lime green!


Interior:
Kenwood Excelon KDC-X997
JL StealthBox w/12"W3v3-2
JL JX500 Mono Block Amp w/Bass Remote
JL XD-PCS4-1B & XB-BLUAIC2-12 Sub/Amp Wiring
WeatherTech Digifit Floor Liners
Rex Rug Mod
OTTATTW Switch Panel for Locker/Compressor
V-Led's 6000k Interior Lights
Uniden PRO520XL CB w/4' FireStik Antenna
Cargo Area Shelf Rack (Currently Building)


Exterior:
MadHatterFab Custom Roof Rack
Front Windows Tinted (23-25% to match the rear)
Diff Breather Extension
05-08 Front Grille Bedlined/Plastidipped
OEM Hood Protector
Plastidipped Logos on rear hatch
CravenSpeed "Stubby Antenna"
Yakima FatCat6 Ski Rack
Firestik 4' Tunable CB Antenna
A Few Stickers..


Recovery Gear:
48" Hi-Lift Jack
ARB Heavy Duty Air Compressor
OBD-II Code Buddy
Tow Strap
Tie Downs
300pc. Mechanic Tool Kit
Flashlights
Zipties
DuctTape
Paper Towels
Rope


Coming soon:
You shall see soon enough!


Wish List:
Gobi Ladder
Warn M8000s
HID Projector's
WeatherTech Rain/Window Deflectors
PowerTank CO2 Tank setup
Griffin Rad. w/E-Fans
Solid Body Mounts




__________________________________




More pictures here... :iconbiggrin: http://s1152.photobucket.com/albums/p485/theXkid95/
 

·
Registered
Joined
·
2,222 Posts
Nice build.
 

·
Registered
Joined
·
1,105 Posts
Discussion Starter #9
I finally got the headers put on, 11 hours total install time including breaks and such.. so it wasn't as bad as it seemed to be! I'm soo glad for PB blaster because if it wasn't for that stuff the stock headers would still be on the cylinder head, overall it was interesting to say the least!
 

·
Registered
Joined
·
1,105 Posts
Discussion Starter #11
awesome , what difference can you notice with the headers?
They sound great, they have a bit of a rumble at idle but it's not loud, but they do get pretty loud @ higher rpm. There's a very noticeable power difference also, better at the throttle and it seems like it wants to just take off easier than before.
 

·
Registered
Joined
·
1,105 Posts
Discussion Starter #13
So with the front diff being out of commission, I've finally decided to start piecing everything together for a titan swap! I'll be starting with the M226 and the M205 then work my way into the suspension. The plan is to have it all be done by May for Moab!
 

·
on line
Joined
·
776 Posts
So with the front diff being out of commission, I've finally decided to start piecing everything together for a titan swap! I'll be starting with the M226 and the M205 then work my way into the suspension. The plan is to have it all be done by May for Moab!
If you need anything from PRG, start ordering now. You might get it by May.:blackeye: Good luck w/ the build.
 

·
Registered
Joined
·
1,105 Posts
Discussion Starter #15
Got a set of Dorman Titan LCA's tonight from SPZXterra! and I'll be ordering the TS kit from PRG this week! Looks like the titan swap is coming along faster than expected:D If anyone is trying to get rid of an M205 or M226 at a reasonable price let me know because I'm in the market!
 

·
Registered
Joined
·
1,105 Posts
Discussion Starter #18
NICE! Get some skids too so we can finish some of those blacks together Kyle!!!
Skids will definitely on top of my to do list after I finish the TS! by the time I have everything thing good to go I'll be more than ready to do some wheelin! It's been a few months now since I've been and I'm already starting to go crazy... especially now that it's starting to snow! :bounce:
 
1 - 20 of 496 Posts
Top