Second Generation Nissan Xterra Forums banner
1 - 20 of 66 Posts

·
on line
Joined
·
3,929 Posts
Discussion Starter · #1 · (Edited)
Well in May 2012 I unloaded the Xterra and went in a new direction, heres my 2012 Subaru WRX. I do miss the Xterra and maybe someday I'll get another.





New wheels, going to powdercoat them white possibly...


Got her tuned, 299whp/323wtq




Username: Matsayz
Year: 2005
Make: Nissan duh
Model: Xterra
Trim: S
Color: Desert Stone
Mods:
PRG Advance 4x4 package with upgraded Eibach springs
Shrockworks Front bumper
Shrockworks skids
Rear bumper from MaXterra (Dave) (bought 5/8" shackles with 3/4" PIN, found at Trail Duty for $20)
AJ's SuperSquare sliders (first bolted, now welded on)
Xoskel Rear light bar
2 Hella fog lights(on bumper)
2 cheapo rear lights
Finally got the stock fogs for the Shrock (thx Marcin!)
Smittybilt XRC 8 Comp Series winch w/ synthetic rope
Firestone Destination tires 285/75/16
Pioneer FHP8000BT(Pioneer XM radio unit)
Fully Amsoiled
BullyDog tuner
Volant CAI w/ Powercore filter
IMS from COfronty
TheNewX.org stickers(+5.5hp!!) I've got a few so add'em up!
Customer Arizona pin-striping(free!)


THEN: Day 1 on our way home from the dealer


NOW:


At her peak of mods:


A little three-wheel action(first weekend I bought the Xterra)


Before lift w/ Shrock bumper

After w/ PRG lift


Xoskel Light cage installed(not wired just yet), AJ's Super-Squares installed




Up close and personal!


new Firestone Destination M/T's!





New MaXterra rear bumper


Big Splash and how I lost my grille


LIGHTS! finally...


DIY Interior Bike rack


Put some OR wheels on that I scored for cheap on Craigslist


My new Nevada license plate
 

·
on line
Joined
·
3,436 Posts
Sweet rig
 

·
on line
Joined
·
3,929 Posts
Discussion Starter · #5 ·
installed the Xoskel light cage, thanks Fangars but just havent wired them. did it while i had some down time on our road trip and also installed AJ's sliders. now we just gotta drive all the way back west and get my Firestone MT's and hopefully the shrock skids should show up at the house shortly afterwards. oh btw i've been pulling 19.5 to 20.8 MPG during this trip. thats up thru Colorado, across Iowa, into Michigan and up to Maine. i'll follow up with figures on the trip home(thru TX and all the rest of it). definitely noticed the wind noise when i put the lights up top but oh well, it will go along with the MT's right??!!
 

·
on line
Joined
·
16,147 Posts
you X looks great...and is really a spitting image of how i want Χάος to look in the next few months.....so in a way you are my hero...ha ha ha
 

·
on line
Joined
·
7,145 Posts
Now tell the truth. When you were at AJ's place picking up your squares didn't you get the urge to just start driving thru the miles and miles of cornfields 4 wheeling?
 

·
on line
Joined
·
3,929 Posts
Discussion Starter · #12 ·
Lookin good!

And there is no such thing as a "tool you don't need".
but a heat gun? maybe i'll give it to you when i come back over to borrow your right angle drill. i need to finish installing my super-squares i got from AJ, maybe you can weld them! i know how much you liked doing that. :eek:ccasion5:

Now tell the truth. When you were at AJ's place picking up your squares didn't you get the urge to just start driving thru the miles and miles of cornfields 4 wheeling?
well we had just drove from Boulder, CO to like Ottumwa and then up to AJ's place the next morning so i was DONE with corn....
 

·
on line
Joined
·
7,145 Posts
You could've stopped by my house and I would've put your sliders on for you.
 

·
on line
Joined
·
3,436 Posts
I'm really diggin those Lo pro light bars. I'm going to have to adjust my funds to make it happen.
 

·
on line
Joined
·
3,436 Posts
Sorry, I meant light cage not light bar.
 

·
TNX Administrator
Joined
·
20,554 Posts
Your rig is look'in REALLY GOOD!!. I just hope someday to have something look'in just as good!
 
1 - 20 of 66 Posts
Top