I def need to do this as the panic alarm has gone off on me about half a dozen times in the 10 months I've had my X.
How-to: Render Key Fob Less Sensitive - PBR
Sorry no Pix but I did this (in a moment of passion) when I set off my panic alarm this morning carrying a bunch of crap in the same hand as my keys... :mumum:
1. Remove split ring from fob.
2. Using flat tip screwdriver pry apart two halves of fob.
3. Carefully seperate hard plastic shell from black/red rubber button piece.
4. Carefully lift out circuit board from button piece.
5. Take x-acto knife and trim down the bump of the offending button.
6. Re-assemble following steps in reverse.
Buttons still work just don't go off when you even think of bumping them... :cheers:
1. Remove split ring from fob.
2. Using flat tip screwdriver pry apart two halves of fob.
3. Carefully seperate hard plastic shell from black/red rubber button piece.
4. Carefully lift out circuit board from button piece.
5. Take x-acto knife and trim down the bump of the offending button.
6. Re-assemble following steps in reverse.
Buttons still work just don't go off when you even think of bumping them... :cheers:
1 - 1 of 19 Posts
1 - 1 of 19 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Second Generation Nissan Xterra Forums
We’re the best Nissan Xterra forums to talk about your Nissan Xterra Mods and off-road adventures. The New X is the ultimate club Xterra.
Full Forum Listing
Explore Our Forums
Top Contributors this Month
View All
El_Guevara
101 Replies
Tacodad87
59 Replies
michael smith (sure!)
54 Replies
Recommended Communities
