Rather than running new speaker wires through the doors, I thought it might be easier if someone could tell me which two wires on the door harness go to the 6x9's.
Yeah, I realize they are the exact same ones that go to the speaker, but I was just wondering what colors those were, so I could wire the new amp to my stock door speakers for now. I'll try the battery trick, hopefully I can see the cone moving in there so I can get the polarity right. If not, I'll just wait for some new 6x9's. Thanks!
I would just run the wires from the amp to the back of the radio...but here you go
Radio 12v
yellow
+
radio harness
Radio Ground (chassis)
Radio Ignition green/black + radio harness
Radio Illumination red + radio harness
Factory Amp Turn-on green/white + radio harness
Power Antenna N/A
LF Speaker +/- brown - blue +,- radio harness or amp under pass seat
RF Speaker +/- lt. green - red +,- radio harness or amp under pass seat
LR Speaker +/- green - black +,- radio harness or amp under pass seat
RR Speaker +/- gray - orange +,- radio harness or amp