Second Generation Nissan Xterra Forums banner

front diff skid plate mounting

3273 Views 12 Replies 4 Participants Last post by  Offroad
Well after inspection of my skid plates this weekend I noticed that one of the bolts holding on the front diff skid plate was loose. It appears that the welded bolt inside the X member broke.

Any ideas on how to get to this bolt?
1 - 1 of 13 Posts
If you can get one of those telescoping magnets from your local parts store. I have a couple in my tool box. If there's an opening that you can get into that will allow you to bring that nut out through then try that.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top