[Blake]

Username: Blake

Make: Nissan
Year: 2006
Model: Xterra
Trim: S
Color: Granite

MODS

Options:
Mud Guards -- removed
Running Boards -- removed
Flip Down Passenger Seat
Emergency Kit in the Back

Suspension/Wheels:
BFG A/T KO2 285/75 Tires
Calmini Spacer / Shackle -- 2" Lift Kit
AAL Installed w new U Bolts
2012 Xterra Pro4X Shocks/Springs
2013 Pro4X Rims Plasti-dipped black
1.25" Wheel Spacers

Engine/Drivetrain:
K&N CAI
New Radiator
Fan for Radiator
Tuner

Exterior/Accessories:
Nissan Foglights
Blacked-out Headlights
Blacked-out Grille (Plasti-dip)
Cravinspeed Short Antenna
Bug Shield (Removed now)
In-grove Window Guards
All Exterior Plastic has been Re-painted
All Emblems Match the Rims
3.4% Tint All the way Around
Window Strip that Comes Down about half way Down 3.4%
Hood Blackout

Electrical:
Pioneer Speakers / Components up front
Pioneer 4000NEX Double Din Head Unit with CarPlay
12" Sub in the Back in Custom Ported Box
Valentine One Hardwired and Custom Mount under Mirror
Cheap-o backup Camera
HIDs in Headlights and Foglights
Retrofitted Headlights
40" LED on Roof

Coming soon:
Body lift?

PHOTOS






Updated Picture

Front Shot


Headlight Mod

Updated Headlight Picture


Viggs Blackout


Inside Shot


Pioneer 4000NEX

Updated Pictures:

 

[Blake]

Added Some Things:

Pro-4X Rims
Retrofitted Headlights
LED Bar

 

[Blake]

removed bug guard on the front and hood blackout going on as soon as it's done being detailed... working on that all this week.

 

[Spdu4ia]

Nice. Will look great with hood blackout
Posted via Mobile Device

 

[Blake]

for sure! going to detail the piss out of the hood to make sure all the swirls are out, then get it applied

 

[Mr. Projekt]

so does the PRO4X shocks springs help with the lift at all?and you did a shackle and AAL combo....what is your total lift in front and rear with all that?

 

[Blake]

not sure if it helped out with the lift; my factory ones had about 80,000 miles and i got the pro4x ones for cheap

i think total should be about 3 inches? not 100% sure, i haven't done any measuring to validate that

 

[Blake]

07/25 Viggs Install

this is by far the cheapest worst vinyl i have seen in my 30 years of living



after 2 hrs, finally done



have any of you dealt with them for replacement/refund?

 

[Spdu4ia]

3m is a very high quality product sorry you had install troubles definetly get the air release one next time . Not to be rude but you messing up the install doesn't mean you get a refund.
Posted via Mobile Device

 

[XterraTSP4]

Nice X. Loving that color with everything being tinted/blacked out!

 

[Blake]

thanks a lot!! it's been coming together quite nicely! now if it can just stay this way!

 

[PA PRO 4X]

Great looking X. Hello from PA.

 

[Beavertonite]

What kind of paint did you use to paint the side steps? I'd like to touch up a few plastic parts on my truck. I have the Granite colored X as well.

 

[Blake]

Great looking X. Hello from PA.

Thanks a lot!!

 

[Blake]

What kind of paint did you use to paint the side steps? I'd like to touch up a few plastic parts on my truck. I have the Granite colored X as well.

I used some SEM bumper paint for all of the plastic.. Medium Grey

its paint + primer in one, sprays amazingly

Just have to tape up and make sure no overspray gets over; because it will

 

[Blake]

took 2 tries but here you go:

 

[GPD605X]

Looks good!

 

[Polar Bear]

Hey your X looks great man!

 

[Blake]

thanks a lot!

 

[jeffnjm3]

Looks great! same color as mine