Second Generation Nissan Xterra Forums banner
Cancel

05+ xterra wheel cross section (with measurements)

5907 Views 14 Replies 10 Participants Last post by  Grunzen, 
C
Since i had some free time and 5 X wheels laying around waiting to go to the powder coater, i figured i would make this cross section up as to make finding wheels to fit the new x simpler

these are not the minimum dimensions for clearance, they are just the dimensions of the 2005+ 16" steel wheel, once i mount them i will measure clearance and shade in the cross section accordingly so we know what dimensions a wheel needs to have in order to fit the X.

this should be alot easyer than trying on a million different wheels just to see if they fit.

without further adue...


(not to scale, bottom of picture is the outside of the rim)
See less See more
Reply
Save
Like
1 - 1 of 15 Posts
A
Would that be the ever-important brake caliper clearance dimension? It looks like it, if I'm reading it correctly.

Also, has anyone test-fitted Unique 297 steelies?...They have the same specs as the MB Predator wheels that supposedly fit: (16x8, 6 - 4.5 bolt pattern, 12mm offset).

I did a search here but didn't see them mentioned.

EDIT: Discount Tire's site sucks, links don't work after a while...I removed it.
Reply
Save
Like
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Second Generation Nissan Xterra Forums
We’re the best Nissan Xterra forums to talk about your Nissan Xterra Mods and off-road adventures. The New X is the ultimate club Xterra.
Full Forum Listing
Explore Our Forums
General Xterra Powertrain & Driveline For Sale Suspension & Steering Exterior
Top