Nissan Xterra Fog Light LED Bulbs! See Comparison Photos! Plug & Play Install - Second Generation Nissan Xterra Forums (2005+)
 19Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 53 (permalink) Old 04-01-2015, 11:59 AM Thread Starter
AutoGuide Supporting Vendors
 
Diode Dynamics's Avatar
 
Join Date: Apr 2014
Location: St. Louis, MO
Posts: 213
Arrow Nissan Xterra Fog Light LED Bulbs! See Comparison Photos! Plug & Play Install



Nissan Xterra Fog Light LED Bulbs



We carry LED bulbs for replacement of your Xterra fog lights, in all major sizes. They are available in HP, XP, and XML styles. This will make your fog lights a nice bright white that closely matches factory HIDs! Just simple plug and play, replace the bulb and you are good to go!

We carry the brightest, highest-quality bulbs at the lowest prices. Your order will ship same day, and we're here if you need us for support and service. And we do not raise prices to astronomical levels- We're breaking that market trend, and offering you great, low prices, every day. These LED bulbs are designed by us here in St. Louis, and every bulb carries with it a three-year limited warranty.

Diode Dynamics offers several bulb model options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.

HP48: 265 lumens. Slightly lower brightness than factory.

XP80: 510 lumens. Similar brightness to factory.

XML2: 1410 lumens. Much brighter than factory. These are bright!

*XML2 is available in 3000K Yellow / 4000K / 5000K / 6000K Color Temperatures

Please note that most LED fog lights are intended for cosmetic purposes only, and will not project light in the same way that the factory bulbs do. Your car will look great at night, but if you are looking for higher output, we strongly recommend using an HID conversion.

Bulb Design

HP48: This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

XML2: NEW! Two opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design.

These bulbs are made up of a quality plastic connector to slide right into the plug, as well as high durability terminals. A load resistor is embedded to prevent blowing the LEDs from voltage surge, and a diode is implanted to protect the LEDs from reverse polarity. The LED is wired for 12V operation, the kind found on all modern vehicles.


Included in your order is TWO BULBS (to fit your Xterra).


All of our products come with a 30-day satisfaction guarantee and a 3-year limited warranty.


Click below for more info or to order:


2005-2015 Nissan Xterra









Click below for more info or to order:


2005-2015 Nissan Xterra



If you have any questions, please don't hesitate to post, PM, email [email protected] or call: (314) 205-3033

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.
bluez likes this.

Last edited by Diode Dynamics; 10-23-2015 at 12:28 PM.
Diode Dynamics is offline  
Sponsored Links
Advertisement
 
post #2 of 53 (permalink) Old 04-01-2015, 12:00 PM Thread Starter
AutoGuide Supporting Vendors
 
Diode Dynamics's Avatar
 
Join Date: Apr 2014
Location: St. Louis, MO
Posts: 213
New comparison collage added!

More threads coming soon!

Thanks!
Nick C.
bluez likes this.
Diode Dynamics is offline  
post #3 of 53 (permalink) Old 04-01-2015, 12:59 PM
Senior Member
2010 Xterra SE 2wd
 
Join Date: Aug 2012
Location: Centreville, VA
Posts: 144
Wow, I like the XML2 5000K, They look blinding. Are they?

I can't be the only one who looks back at their X when walking away.
NOVaXTERRA10 is offline  
 
post #4 of 53 (permalink) Old 04-01-2015, 01:01 PM
Banned
2012 Knight Armor Xterra Pro-4X 6MT
 
Join Date: Sep 2011
Location: San Diego, CA
Posts: 1,279
id be interested in a comparison between the stock housings and the luxeon led replacement housings.
knightrider is offline  
post #5 of 53 (permalink) Old 04-01-2015, 01:07 PM Thread Starter
AutoGuide Supporting Vendors
 
Diode Dynamics's Avatar
 
Join Date: Apr 2014
Location: St. Louis, MO
Posts: 213
Quote:
Originally Posted by NOVaXTERRA10 View Post
Wow, I like the XML2 5000K, They look blinding. Are they?
The XML2s produce 1,420 lumens (measured), which is quite a bit more than the factory halogen bulbs. However, they won't produce a significant amount of glare due to their unique design.

Our Luxeon replacement housings are the ideal option for applicable vehicles. They produce a wide output pattern with a sharp cutoff.



The Luxeon replacement housings are DOT/SAE compliant and utilize Phillips Luxeon LEDs. They are made with OEM quality components and construction:



We will have a separate thread with more information on the Luxeon housings shortly

Thanks!
Nick C.
Diode Dynamics is offline  
post #6 of 53 (permalink) Old 04-01-2015, 01:09 PM Thread Starter
AutoGuide Supporting Vendors
 
Diode Dynamics's Avatar
 
Join Date: Apr 2014
Location: St. Louis, MO
Posts: 213
Quote:
Originally Posted by knightrider View Post
id be interested in a comparison between the stock housings and the luxeon led replacement housings.
Stock:



Luxeon LED Housing:



Very significant increase in output. Here's another shot of the Luxeon's output pattern in our 2013 FR-S



Nick C.
Diode Dynamics is offline  
post #7 of 53 (permalink) Old 04-02-2015, 10:31 AM
Banned
2012 Knight Armor Xterra Pro-4X 6MT
 
Join Date: Sep 2011
Location: San Diego, CA
Posts: 1,279
thanks for the comparison shots. ive been eyeing the led replacement housings but have yet to see a good shot of the pattern, i like them much better than just replacing the bulbs since it ruins the pattern most of the time making them useless in actual fog. with my hefty bumper i dont think i could fit the XML2 bulbs since the higher position causes less room behind them, so the luxeon replacement housings look like a good option.
knightrider is offline  
post #8 of 53 (permalink) Old 04-02-2015, 11:37 AM Thread Starter
AutoGuide Supporting Vendors
 
Diode Dynamics's Avatar
 
Join Date: Apr 2014
Location: St. Louis, MO
Posts: 213
Quote:
Originally Posted by knightrider View Post
thanks for the comparison shots. ive been eyeing the led replacement housings but have yet to see a good shot of the pattern, i like them much better than just replacing the bulbs since it ruins the pattern most of the time making them useless in actual fog. with my hefty bumper i dont think i could fit the XML2 bulbs since the higher position causes less room behind them, so the luxeon replacement housings look like a good option.
The Luxeon housings produce a really clean 5000K color as well

Feel free to give us a call if you would like more information or technical specs: (314) 205-3033

Nick C.
Diode Dynamics is offline  
post #9 of 53 (permalink) Old 04-16-2015, 01:06 PM
Veteran
2015 Stormtrooper White Xterra Pro-4X 6MT
 
spoolup's Avatar
 
Join Date: Oct 2014
Location: Cottonwood Heights, Utah
Posts: 1,380
Garage
Well I just bit, ordered the fogs, backup, and interior lights. Ill post up what I think when I get them mounted in the Shrock, but I agree, these beamshots above look great. Now I need to research turn signals/ brake etc. Then bumper lights and rack mounted rear lights and Ill be good.

Thanks for the great info so far DD.
bluez likes this.
spoolup is offline  
post #10 of 53 (permalink) Old 04-16-2015, 01:08 PM Thread Starter
AutoGuide Supporting Vendors
 
Diode Dynamics's Avatar
 
Join Date: Apr 2014
Location: St. Louis, MO
Posts: 213
Quote:
Originally Posted by spoolup View Post
Well I just bit, ordered the fogs, backup, and interior lights. Ill post up what I think when I get them mounted in the Shrock, but I agree, these beamshots above look great. Now I need to research turn signals/ brake etc. Then bumper lights and rack mounted rear lights and Ill be good.

Thanks for the great info so far DD.
Thanks for ordering with us!

If you want to learn more about lighting technology, we have a research section here on our site: http://www.diodedynamics.com/store/research-1.html

It explains many of the most commonly answered questions, and will clear up any confusion you may have about lighting

Feel free to give us a call also: (314) 205-3033

Looking forward to seeing installed pictures!

Nick C.
Diode Dynamics is offline  
Reply

  Second Generation Nissan Xterra Forums (2005+) > Supporting Vendors > Diode Dynamics

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Second Generation Nissan Xterra Forums (2005+) forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome