I am looking to change to 285/75-16's once I add my lift. My only concern is the stock spare tire size. I am going to need a tire that is about the same rolling diameter that will fit in the stock location because I take long road trips and do not want to damage anything or have any problems if I get a flat.

Another idea was to install the same size spare, only partially inflated and pump if up the rest of the way with a 12 volt air compressor should I need it.

I don't want to add the spare tire carrier so that is out of the question. Any ideas would be appreciated.

Thanks!

I'd recommend buying a used tire for your spare if you'd prefer to be cost efficient. There are lots of used AT and MT tires for sale in classified ads because people tend to want maximum tread for their AT and MTs.

285/75R16 tires will fit in the stock location.

I got two free BFG AT 285/75R16 from a local tire shop (they had been taken off a chevy pickup because the shop forgot to align the truck ~5k miles before)...but hey, free is free.


anywho, i have mine inflated to 35psi and have a hidden hitch. tire fits fine.

Yes to both of the above. I paid for a new spare, kinda dumb Idea I guess. I'm particular but not worth $200 for sure. Confirm 285 75 do fit.
Some people report you have to air it down to fit, mine fit all air in it. MC

285/75R16's will fit fine in the stock location, just watch the e-brake line. Mine was rubbing on the tire and was starting to wear a hole in the line before I noticed it.

I bought a full spare and glad I did as about 4 months after I bought them I put a huge deep slice in one of my tires. It still holds air, but it's now my spare.

Thanks guy! I figured I could look to you all for the answer.

Will a 285 75 16 fit under the truck where the stock spare mounts? If not I guess I will have to get a yak tire mount.

Will a 285 75 16 fit under the truck where the stock spare mounts? If not I guess I will have to get a yak tire mount.
....um, yeah

I was kinda lookin for an excuse to buy a rear bumper lol