Second Generation Nissan Xterra Forums (2005+) - View Single Post - SyndicateX Build Thread Updated - Project Flexterra 2.0
View Single Post
post #1 of (permalink) Old 06-11-2014, 12:46 PM Thread Starter
Supporting Member
2011 Night Armor ❌terra Pro-X4
SyndicateX's Avatar
Join Date: Aug 2011
Location: Ogden, UT
Posts: 147
SyndicateX Build Thread Updated - Project Flexterra 2.0

"Photo by: KUMA"

Username: SyndicateX

Make: Nissan
Year: 2011
Model: Xterra
Trim: Pro-4X
Color: Night Armor


Front Suspension:
Axle- 2012 Jeep Wrangler JK Dana 30 brake to brake
Teraflex Sleeve, Upper and Lower Gusset Kit
Custom built truss
Eaton E-Locker
Riddler Diff Cover
G/2 4.56 Ring and Pinion
Fox Coilover with remote reservoir
Viper Coil Springs 350/350
4-BDS Adjustable Flex Ends
2-Fat Bob's Garage rubber control arm bushings.
Midnight 4x4 Control Arm Brackets
Midnight 4x4 Shock tabs
Trailgear shock hoops, modified
Driveshaft-Seagull Diesel. Modified and lengthened stock Front driveshaft Double Cardon with 1310 U-joints and conversion flange at pinion.
Xterra extended stainless steel brake lines mount to JK calipers.
Xterra ABS line cut and spliced into the JK ABS line. The Xterra sensor was too long or not enough taper to slide into the hub.
Custom built front cross member
Modified stock transmission cross member
Custom track bar with heim ends
Rough Country Track bar bracket at frame side

Jk Tie Rod Knuckle to Knuckle
DOM tube with Heim ends at Pitman to Knuckle
Toyota steering gear box with pitman arm-tapered drilled to fit JK tie rod
Toyota steering shaft and Xterra shaft modified
Frame plated and sleeved to mount steering box
Custom built powersteering hose

Wheel spacers 5 on 5 to 6 on 5.5 Front 2"
Wheel spacers 6 on 4.5 to 6 on 5.5 Rear 1.5"

Rear Suspension:
Stock M226 axle
Spring over axle
BDS Fox Shocks
Tom Woods double cardon driveshaft-redone by Seagull Diesel
ARB Air Locker
Blue Torch Fab Diff cover with high fill

maXTERRA Rear Bumper
maXTERRA Rock Sliders
Xoskel Full Replacement Roof Rack
Aurora 40" light bar via Dark Hour Lighting

Currie Anti Rock Sway Bar: In Progress


From the Beginning:

2" Body Lift with 285/70R17 Dueller Revo A/T2

2" body lift with Titan Swapped

2" Body lift Titan swapped with Fabtech 6" Frontier kit and spring over axle rear. 315/70R17 Duratrac

Solid Axle Swapped

37/13.50R17 Toyo MTR's, 37's, 37 inch tires


Reconfigured custom 3-Link

Teraflex Tera44 Front JK Rubicon Axle
5.13 Gears
Eaton E-Locker
Artec Industries Lower Control Arm Frame Brackets
Trail-Gear Joints

G/2 Core 60 Rear JK Axle
5.13 Gears
Eaton E-Locker

Atlas Transfer Case


Titan Swap-REMOVED, 6" Fabtech Frontier Lift-REMOVED, Spring Over Axle, 4.56 Gears, 37/13.50R17 Toyo MT's. Check, Check.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by SyndicateX; 05-14-2016 at 10:59 PM. Reason: Tweaked & Added to your Signature
SyndicateX is offline  
For the best viewing experience please update your browser to Google Chrome