So got around to installing these today figured i'd share my version. Found the lights thanks to "Fangers" in the bumper mouth bracket thread, and learned these would def fit after seeing "1r1shrover"s thread on the lights. so thanks to you guys for the idea.. i was gonna end up taking some fogs off a lexus truck at the JY if i didnt do this. picked up a set of the Platinum Burner driving lights from walmart for 19 bucks. I had all the hardware needed already but you will need 2 self tapping screws, 2-4 3/4''x 1/4'' bolts with nuts, lock washers, some butt connectors, angle iron, paint of your choice, 16 gauge wire and another rocker to avoid using the crap they give you.
trimmed about 1/8 inch of the center of the factory fog location so these would fit through. if you look at the fog spot you will see the little flat lip i'm talking about...thats what you're trimming. take your time, if you go too wide it will show in the end.. got quick with mine and now i've got a visible mistake. My fogs sit with just the glass lense outside the plastic bumper after trimming.
made my bracket mounts ALOT beefier, since the last time i did ones like "1r1shrover"s version on my jeep they bounced. hated that, so i took some old steel shelf pieces i have for projects like this, cut it down to roughly 6 inches and cut a piece out so i could bend it to match the bracket that comes with the lights.
self tapping screw into the bumper, (also my ground) bolted the light to my bracket, added an extra nut since i didnt have any lock washers and didnt want to run to lowes. sorry this shot is shakey...before i grounded & did wiring it was too dark by the time i finished..so this is all I have right now.
as for wiring, power directly from battery with the inline fuse provided going to a LED rocker i got at RS (you will need to extend this according to how you run it). grounded each light to the self tapping screws in the steel bumper. run the power wire from the lights together as one wire to the load spot on the rocker. grounded my rocker by drilling a hole and bolting it to the section of metal framework behind the kick panel. mounted the rocker in a blank by the mirror controls. (few write ups on that floating around) left a gap for my VDC relocation next week. and there ya go... aftermarket fogs. mine cost me a total of 22 bucks since i had just about everything already. if you need everything...could do it for roughly 30 bucks, cant complain!
I'll get a better pic of the rocker later.. it also has a 3mm LED to indicate when the lights are on. PERFECT location, cant see the light when driving so its not distracting, but it catches your eye when you get out so as not to leave them on and kill the battery.
now, i just want to swap in some insanly bright yellow bulbs and im good. gonna run 4 more in the bumper mouth after I get a bracket so these will def be yellow sometime soon. hope this helps some of you guys.